Paneles acrílicos láser de cobre cepillado/negro con adhesivo (12x24)
Paneles acrílicos láser de cobre cepillado/negro con adhesivo (12x24)
No se pudo cargar la disponibilidad de retiro
Da vida a tus creaciones con estos impresionantes paneles de cobre/negro cepillado. Elaborados con acrílico duradero que se puede láser, estos paneles de 12 x 24 están respaldados por el mejor adhesivo para una sujeción segura y duradera.
Configuraciones de prensa de calor:
Configuración de IQ : Superior 280 Inferior 320 durante 45 segundos
Platina única : 300 durante 50 segundos
El tamaño del panel es de 12 x 24 pulgadas.
El grosor es de 1/16" o 1,5 mm (puede variar ligeramente)
En cada panel (12 x 24) caben sin esfuerzo 36 parches (2,5 x 2,5 pulgadas).
Consejo: Limpiar la superficie con alcohol y toalla y grabar.
Compartir
![Brushed Copper/Black laserable acrylic panels w/adhesive(12x24) - #LoneStar Adhesive#](http://lonestaradhesive.com/cdn/shop/files/brushed-copperblack-laserable-acrylic-panels-wadhesive12x24-400213.jpg?v=1716877903&width=1445)
![Brushed Copper/Black laserable acrylic panels w/adhesive(12x24) - #LoneStar Adhesive#](http://lonestaradhesive.com/cdn/shop/files/brushed-copperblack-laserable-acrylic-panels-wadhesive12x24-402235.jpg?v=1716877903&width=1445)
![Brushed Copper/Black laserable acrylic panels w/adhesive(12x24) - #LoneStar Adhesive#](http://lonestaradhesive.com/cdn/shop/files/brushed-copperblack-laserable-acrylic-panels-wadhesive12x24-339029.jpg?v=1716877904&width=1445)
![Brushed Copper/Black laserable acrylic panels w/adhesive(12x24) - #LoneStar Adhesive#](http://lonestaradhesive.com/cdn/shop/products/brushed-copperblack-laserable-acrylic-panels-wadhesive12x24-533706.jpg?v=1716848305&width=1445)
![Brushed Copper/Black laserable acrylic panels w/adhesive(12x24) - #LoneStar Adhesive#](http://lonestaradhesive.com/cdn/shop/products/brushed-copperblack-laserable-acrylic-panels-wadhesive12x24-439612.jpg?v=1716848305&width=1445)
Looks amazing, and engraves wonderfully!
Hands down, best adhesive I have used.
Haven’t used yet..but believe it’s want I wanted
The rowmark acrylic is great to engrave on, however I can’t say I’m having the best experience with the adhesive. It does not adhere to the acrylic back very well and after heat pressed, the acrylic has separated from the hat after a couple days.
Hi Nathan, We have examples of what the adhesive looks like on the non-porous surface of the acrylic included with the application directions on the website. This may clarify what is to be expected. If the adhesive is not adhering to the hat, please check the temperatures reached by your platen or be sure you're using the appropriate dwell time and temp as set forth in our pressing recommendations listed at the bottom of our website. Feel free to email us if you continue to have difficulty!
Exactly as expected. Great quality