The production process for these sheets caused some of the orange to be discolored, as shown in the included photos. In some cases, it is closer to burnt orange for the majority of sheets, while other sheets have more of a blue tint or streak of discolored orange. Please see the included photos for examples of what may be expected.
All sales final and not discount eligible. At least 90% or more of the sheet is useable. May include blemishes such as small scratches, dents, or will be considered a BLEMISHED/LIMITED RUN because they were not quite the color we were desiring post production. They're sold WITH adhesive only.
Let your project SHINE with our new Stainless / Black / Orange TriLayer Durra-Bull™ Laserable Acrylic Panels.
Exclusive to LoneStar Adhesive, this new tri-layer acrylic will open up ample opportunity to help your customers' projects stand out from the pack.
Watch the YouTube tutorial below to learn more about pressing the acrylic!
Order of colors: Stainless (will have clear, removable film on it to prevent scratching), Black, Orange
Heat Press Settings: IQ setting: Top 280°F / Bottom 320°F for 45 seconds Single Platen: 300°F for 50 seconds.
Panel size: Each panel is1/16" or 1.5mm thick (minor, slight variations are normal), and APPROXIMATELY 12" x 24" (or slightly longer). The adhesive sheets are precision cut to exactly 12" x 24" and squared up with one corner of the panel, so there may be some acrylic not backed with adhesive along one or two edges. Each (12" x 24") panel will effortlessly fit 36 (2.5" x 2.5") patches.
Tips: Remove the clear protective film on the FRONT of the acrylic panel before engraving. Yes, the adhesive will be bubbly on the back of the panel, as acrylic is nonporous and the functionality of the adhesive will not be affected. Clean the surface of the acrylic with soapy water and towel, or a gentle baby wipe, after engraving.
