Paneles acrílicos láser de acero inoxidable cepillado/negro con adhesivo (12x24)
Paneles acrílicos láser de acero inoxidable cepillado/negro con adhesivo (12x24)
Da vida a tus creaciones con estos impresionantes paneles de acero inoxidable cepillado/negro. Elaborados con acrílico duradero que se puede láser, estos paneles de 12 x 24 están respaldados por el mejor adhesivo para una sujeción segura y duradera.
Configuraciones de prensa de calor:
Configuración de IQ : Superior 280 Inferior 320 durante 45 segundos
Platina única : 300 durante 50 segundos
El tamaño del panel es de 12 x 24 pulgadas.
El grosor es de 1/16" o 1,5 mm (puede variar ligeramente)
En cada panel (12 x 24) caben sin esfuerzo 36 parches (2,5 x 2,5 pulgadas).
Consejo: Limpie la superficie con agua y jabón y una toalla después del grabado.
Compartir
Easy to work with and engraves nicely! I wish there was a backing on the adhesive though.
Great stuff to work with. Makes great trophy plates.
This was the key item I needed from my order of multiple items but was the worst in the lot. I expected for the sheets to be flat and crisp as they appear in the picture- not the case.
All of them were bent into a curve - almost curled at the ends. Due to the warping I can’t use them as they came. I reached out to the seller and to be fair I asked if there was a way to fix them or can exchange. The response was less than I had expected - no acknowledgement of inconvenience or the poor quality just direction to use a heat press or iron to fix them I. A sentence or two.
Not a good look / first impression for a first time buyer. Won’t be buying again. Unfortunate.
This copper looks and cuts beautifully. I don’t recommend doing larger pieces for hats unless it’s on a flat bill just because the acrylic kinda pushes against your head. However, great product!! It cuts sooo nice!
Hat press setting recommendations:
230 degrees
45seconds
Use heat tape and press 2 times remove heat tape after first press