Laserbare Acrylplatten in gebürstetem Nickel/Schwarz mit Kleber (12x24)
Laserbare Acrylplatten in gebürstetem Nickel/Schwarz mit Kleber (12x24)
Verfügbarkeit für Abholungen konnte nicht geladen werden
Erwecken Sie Ihre Kreationen zum Leben mit diesen atemberaubenden Paneelen aus gebürstetem Nickel/Schwarz. Diese aus langlebigem, laserbarem Acryl gefertigten 12x24-Platten sind mit dem besten Kleber versehen, der für einen sicheren und dauerhaften Halt sorgt.
Einstellungen der Transferpresse:
IQ-Einstellung : Oben 280 Unten 320 für 45 Sekunden
Einzelplatte : 300 für 50 Sekunden
Die Panelgröße beträgt 12 x 24 Zoll.
Die Dicke beträgt 1/16 Zoll oder 1,5 mm (kann geringfügig variieren).
In jedes Panel (12 x 24) passen mühelos 36 Patches (2,5 x 2,5 Zoll).
Tipp: Oberfläche mit Alkohol und Handtuch reinigen und gravieren
Aktie
![Brushed Nickel/Black laserable acrylic panels w/adhesive(12x24) - #LoneStar Adhesive#](http://lonestaradhesive.com/cdn/shop/files/brushed-nickelblack-laserable-acrylic-panels-wadhesive12x24-107761.jpg?v=1716877904&width=1445)
![Brushed Nickel/Black laserable acrylic panels w/adhesive(12x24) - #LoneStar Adhesive#](http://lonestaradhesive.com/cdn/shop/files/brushed-nickelblack-laserable-acrylic-panels-wadhesive12x24-275769.jpg?v=1716877904&width=1445)
![Brushed Nickel/Black laserable acrylic panels w/adhesive(12x24) - #LoneStar Adhesive#](http://lonestaradhesive.com/cdn/shop/files/brushed-nickelblack-laserable-acrylic-panels-wadhesive12x24-362569.jpg?v=1716877904&width=1445)
![Brushed Nickel/Black laserable acrylic panels w/adhesive(12x24) - #LoneStar Adhesive#](http://lonestaradhesive.com/cdn/shop/products/brushed-nickelblack-laserable-acrylic-panels-wadhesive12x24-524363.jpg?v=1716851892&width=1445)
Looks amazing, and engraves wonderfully!
Hands down, best adhesive I have used.
Haven’t used yet..but believe it’s want I wanted
The rowmark acrylic is great to engrave on, however I can’t say I’m having the best experience with the adhesive. It does not adhere to the acrylic back very well and after heat pressed, the acrylic has separated from the hat after a couple days.
Hi Nathan, We have examples of what the adhesive looks like on the non-porous surface of the acrylic included with the application directions on the website. This may clarify what is to be expected. If the adhesive is not adhering to the hat, please check the temperatures reached by your platen or be sure you're using the appropriate dwell time and temp as set forth in our pressing recommendations listed at the bottom of our website. Feel free to email us if you continue to have difficulty!
Exactly as expected. Great quality