Acrylic: Red / White / Blue TriLayer Durra-Bull™ Laserable Panels (12"x24")
Acrylic: Red / White / Blue TriLayer Durra-Bull™ Laserable Panels (12"x24")
Couldn't load pickup availability
Give your project a patriotic flare with our new White / Blue / Red TriLayer Durra-Bull™ Laserable Acrylic Panels.
Exclusive to LoneStar Adhesive, this new tri-layer acrylic will open up ample opportunity to help your customers' projects stand out from the pack.
Watch the YouTube tutorial below to learn more about pressing the acrylic!
Order of colors:
White (will have clear, removable film on it to prevent scratching), Blue, Red
Heat Press Settings:
IQ setting: Top 280°F / Bottom 320°F for 45 seconds
Single Platen: 300°F for 50 seconds.
Panel size:
Each panel is1/16" or 1.5mm thick (minor, slight variations are normal), and APPROXIMATELY 12" x 24" (or slightly longer). The adhesive sheets are precision cut to exactly 12" x 24" and squared up with one corner of the panel, so there may be some acrylic not backed with adhesive along one or two edges.
Each (12" x 24") panel will effortlessly fit 36 (2.5" x 2.5") patches.
Tips: Remove the clear protective film on the FRONT of the acrylic panel before engraving. Yes, the adhesive will be bubbly on the back of the panel, as acrylic is nonporous and the functionality of the adhesive will not be affected. Clean the surface of the acrylic with soapy water and towel, or a gentle baby wipe, after engraving.
Share
This is by far my favorite acrylic of all. Just the thought of someone having this created is thinking outside of the box. This product is a gamer changer. Lonestar never will disappoint!!!!
I am new to the laser engraving business. My only concern with this material is that I wish the blue layer was a little thicker. I am having a hard time dialing in to get a good blue without getting into the red. It just seems like if it were about 2x thicker, it would be a lot easier. The red comes out great and cuts like a champ. This may be 100% operator error. But I will get it figured out at some point.
Engraves perfectly! Excited to add it to our product lines.
Love this red white blue tri color acrylic
Living in a rural area most of my customers still fly the flag at home and are proud of their country and like to show that pride.
This tri-color acrylic is great. The flag patches snap with detail and definition. My customers love them on their hats and they all wear hat. The product lasers well and once you have your settings right it goes smooth as silk. I have also made some Christmas ornaments with it.
